The device

An internationally certified medical vaporiser.

Medically certified in multiple countries and backed by certified medical device manufacturing: Australia ARTG Entry 526764 · Class IIb, Health Canada HC MDL 113029, Medsafe NZ WAND registered, and MDSAP · ISO 13485.

  • Australia: ARTG Entry 526764 · Class IIb
  • Canada: Health Canada HC MDL 113029
  • New Zealand: Medsafe NZ WAND registered
  • MDSAP · ISO 13485

Intended use statement

What the Elite II is for.

The Grenco Medical Elite II Vaporizer is intended for use at home, in a hospital, or doctor's office for vaporizing of cannabis flowers and for inhaling cannabinoids derived therefrom. Active ingredients in the inhaled cannabinoids are delivered into the human body via the alveoli for the appropriate medical indication as prescribed by your physician. Use is intended by patients who are older than 18 years of age.

Designed around the patient

Considered.

A closer look at the details.

Heat & control

Even, repeatable heat.

Convection and conduction work together around a full ceramic chamber, with a patented clean-air intake; so the device behaves the same way from the first inhalation to the last. Set anywhere from 93 °C to 221 °C and the Elite II holds it to within ±1 °C, shown on a full-colour screen with customisable haptic feedback. You always know exactly what it's doing.

Construction

Made to medical standards.

This device platform represents one of the highest levels of international medical-grade compliance achieved within the vaporisation category, supported by extensive IEC and ISO certifications covering safety, biocompatibility, usability engineering, electrical systems, and clinical performance validation.

Everyday handling

Travel Ready

Pocket-sized and discreet, with a zirconia magnetic mouthpiece that clicks off for easy loading and a removable pick tool. The zirconia mouthpiece carries an integrated spiral air path that cools the vapour on its way through, so the mouthpiece stays cool to the touch. It's designed for comfortable handling, including with reduced dexterity. USB-C charging gives around an hour of use per charge, and it tucks into the included hemp travel case.

Grenco Medical Elite II kit contents including the vaporiser, USB-C cable, silicone sleeve, pick tool, and hemp travel case.

What's included

Everything in the box.

The Elite II kit is supplied with the core device and day-to-day accessories for charging, carrying, handling, and care.

  • 01Grenco Medical Elite II Vaporiser
  • 02Hemp travel case
  • 03Protective silicone sleeve
  • 04USB-C charging cable
  • 05Removable pick tool

The device

Grenco Medical Elite II

Every specification — verified. Every detail — by design.

Zirconia Mouthpiece

Integrated cooling spiral. Lip-contact 40–41°C. Vapour max 49.2°C.

Dual Heating

Convection + conduction with patented clean-air intake & full ceramic chamber.

Precise Temperature

93–221°C programmable. ±1°C accuracy on full-colour TFT display.

Grenco Medical Elite II device shown upright with the TFT display lit at 221 °C.

Magnetic Lid

Tool-free loading — ideal for patients with reduced dexterity.

2100 mAh Battery

USB-C fast charge (1.5 hrs). ~60 min continuous use. UN 38.3 certified.

Safety Systems

Auto-shutdown at 53°C internal temp. Restarts below 40°C. Haptic feedback.

Performance data

Tested for repeatable clinical use.

The device has gone through a rigorous verification and validation programme covering temperature accuracy, component durability, vapour temperature safety, THC delivery kinetics, and international medical device standards.

±1°C

Temperature accuracy

Devices were tested at 180°C, 200°C, and 220°C, with 10 repeats at each setting after cool-down.

4.262 mg

THC captured at 5 inhalations

At 210°C, cumulative THC captured in vapour exceeded the 2.5 mg threshold by 5 inhalations, or 2.5 minutes.

6.057 mg

THC captured at 10 inhalations

Cumulative THC captured was reported above 5 mg by 10 inhalations, or 5 minutes.

49.2°C

Maximum recorded vapour temperature

Verification testing reported maximum inhaled vapour below 50°C and mouthpiece contact temperatures of 40.1°C to 41.3°C.

Certified & backed

On the record.

  • AUAustraliaARTG Entry 526764 · Class IIb medical device
  • CACanadaHealth Canada HC MDL 113029
  • NZNew ZealandMedsafe NZ WAND registered
  • ISOManufacturingMDSAP · ISO 13485

Buy Elite II

Ready when you are.

The Elite II is available directly from our sponsor, Mood State Medical and also via accredited Australian pharmacies.